Installation and commissioning of new pumps at customer site
Rotaserve was asked to provide installation and commissioning on a number of pumps in Boston, USA. Our highly skilled service engineers, who are VCA certified and who are capable to do installation and commissioning, went to the job site and and took care of the alignment and start-up of the pumps.
Between bearings, axially split pumps (BB1)
The alignment and installation of the following pumps were commissioned for the customer.
Pumped fluid: cooling water for use in power plant.
Between bearings, axially split pumps (BB1) by Kirloskar.
Pump type: UP 400-67
Quantity: 3
Capacity: 3000 m3/hr
Head: 45 m
Pump type: UP 500-68
Quantity: 2
Capacity: 3500
Head: 30 m
These new pumps where installed by our Rotaserve B.V. service engineers at a power plant in Boston (USA). During a trial run, the pumps were measured for temperatures, vibrations etc. All the technical data and values obtained were reported in a protocol and handed over to the customer.
Rotaserve also provided a 1 day on-site training for the staff regarding operation and maintenance on the BB1 pumps.
If you would like to know more about maintenance and revision of your pumps, please feel free to contact us on our contact page.
